Monday, November 28, 2016

Fax machine, go off hook

1. Place line  4 (743) into CO group2  (800). 2. From the Fax machine,  go  off hook  and  dial 800  (be sure you are  accessing line 4).  Then  dial  a valid number.   You must  dial out on that line /(line group)  before programming the hot line (dial 740 for line 1, 741 for  line 2, 742  for line 3 etc.…). 3. Program a  System  Speed dial bin  with  a  pause.  To  do  this,  you can  use  PCDBA or  program using the  phone. Using PCDBA Go  to the DX80  PC-DBA System  Resource SPD.   No.   Programming Tenant 1screen   in PCDBA.  Choose a system speed  dial bin (DIR#s 500-699), and insert a P  for pause in its SPD.  No.  field.

Sunday, November 27, 2016

60-Key expansion console

60-Key  Expansion  Console,  B.3,  I.8,  I.9 60-Key  Second Expansion  Console,  B.3,  I.8,  I.9 Analog ports,  I.7 Battery.  See  Cautions Cabinets Expansion, F.2 Cautions, E.1 Battery, E.1 Fuse,  E.1 Power supply,  E.1 CO  lines Capacities.  See  System  capacities Connecting, I.5 Console,  B.3,  I.8, I.9 ESI  Cordless  Handsets.  See  Phones ESI  Presence Management,  D.1 Expansion Cabinet,  F.2 Expansion Console,  B.3,  I.8, I.9 Fuse.  See  Cautions Grounding, F.2,  I.1,  I.3 Hardware  installation,  E.2–F.15 LED functions,  F.15, G.6,  H.6 Main  board,  A.2 Memory  Module, A.3 Installation  or  replacement,  F.5–F.8,  G.5,  H.5 Mirrored Memory  Module  (M3), A.3 Installation, F.9–F.13 MOH,  I.3 NSP  (Network  Services  Processor),  A.7 Overlays,  B.4 Paging, I.4 Phones Digital  Feature  Phones,  B.1 ESI  Cordless  Handsets,  B.2,  B.3 IP  Phones,  B.2 VIP  Softphone,  B.4 Port  cards Capacities, A.4 Charts, I.13–I.20 Installation, G.3–G.4,  G.3–G.4 Installation, F.2 Port  card  adapter,  F.3 Power,  I.1 Power  Distribution Shelf,  A.3 Power supply.  See  Cautions Transformers, wall-mount,  A.3 PRI, I.5 Regulatory  information  (U.S. and Canada),  E.2 Ringer  equivalence number  (REN),  E.2 Serial  ports,  I.3 Site location,  F.1 SMDR, I.3 System  capacities,  D.1 T1, I.5 UPS (uninterruptible  power  supply),  I.1 VIP  Softphone.

Sunday, November 20, 2016

Programming Password Setup

Programming Password Setup  to set the system passwords. For password entry, the system allows eight users to be defined. Each user can have a: • Unique alphanumeric name (up to 10 alphanumeric characters) • Password entry of up to eight digits (using 0 ~ 9, # and • Password level *) The IN level password is used by the System Installer for system programming. The SA or SB level password cannot access the IN level programs. The reverse type (white on black) just beneath the Description heading is the program access level. You can only use the program if your access level meets or exceeds the level the program requires. (SA level password can access to SA or SB programs, and SB level password can access to SB programs only.

Saturday, November 19, 2016

Registration Expire timer

Registration Expire Timer Input Data 60 ~ 65535 seconds Description The Expires value of the REGISTER message which received from DR700 terminal is out of range or when the Expire value is not set up, in case it assigns the effective time to the DR700 terminal. The timer for supervising whether DR700 terminal is connected or not. Default 180 02 03 04 05 06 07 08 09 Subscribe Expire Timer 60 ~ 65535 seconds Session Expire Timer 60 ~ 65535 seconds Minimum Session Expire Timer Invite Expire Timer Signal Type of Service Error Display Timer Digest Authorization Registration Expire Timer 60 ~ 65535 seconds 60 ~ 65535 seconds 0x00 ~ 0xFF (0 ~ 9, A ~ F) 0 ~ 65535 seconds 0 ~ 4294967295 seconds Temporally Password Read Only: Maximum 16 characters (0 ~ 9, a ~ f, A ~ F) The subscribe Expire timer to transmit and receive the terminal operation instructions between the Main Device and DR700 terminal. Set effective time for supervising the Voice Path. Set minimum value of effective time for supervising the Voice Path. Set effective time for Incoming/Outgoing call when the Expire value is not set in the INVITE message received from DR700 terminal. Set Type of Service value which applied to send SIP Message Pac

Friday, November 18, 2016

System parameters

1  System  parameters 11   Initialize 12   Installer  password 13   Administrator  password 14   System clock 141   Set  time/date 142   Automatic  time  setting 143   Clock  adjustment 15   System  timing  parameters 151   Flash duration 152  Transfer  forward  timer 153   Recall  timers 1531   Exclusive hold 1532   System  hold 1533   Hold  recall  rings 154   ACD timers 1541   ACD exit  timer 1542   ACD wrap  timer 1543   ACD  hold recall  timer 155   ACD wrap  timer 156   Cell  phone delay 157   Device  timers 158   VIP Attendant  exit  timer 16   System  feature  parameters 161   Recording  alert  tone 162   Connect  tone 163   Station feature  set activation 164   Esi-Link  location  no./line  group  access  selection 165   Auto  attendant parameters 166   CO  line  parameters 167   Voice  mail parameters 169   Feature  set activation 17   System speed-dial 18   Maintenance/SMDR  serial  port 2  CO  line programming 21   Line  programming 211   Analog  CO  line  programming 212   T1  programming 2121   CO line  programming 2122   T1  frame format  and  line  coding 2123   Line  build-out 2124   CSU  emulation   213   PRI  programming 2131   CO line  programming 2132   Line  build-out 2133   CSU  emulation 2134   Switch  protocol 2135   DID 214   SIP  trunk  programming 2141   SIP  trunk  programming  day/night  mode 2142   SIP  account programming 2145   SIP  pilot table programming 22   Translation  table  programming 221   Centrex/PBX  access  code   222  Toll  restriction  exception  tables   223   ARS  (Automatic  Route  Selection) 224   DID and DNIS/ANI  translation table 225   PRI  pilot number  translation table 226   Local  allow  table 23  Line  parameters 231   Line  receive  volume 232   Analog  line disconnect 233   T1  line  receive  volume 234   PRI  line  receive  volume 24   Caller  ID  programming 3   Extension programming 31   Extension definition  and  routing 32   Extension feature authorization 321   Standard  feature  authorization 322   Advanced  feature  authorization 33   Department  programming 331   Department  definition  and routing 332   VIP ACD  parameters 34   Dial  plan  assignment 341   Flexible  number  assignment 342   Network  numbering 35   Extension button  mapping 37   ESI device  programming 371   Access  schedules 372   RFID  tag programming 373   View RFID  tag numbers 374   ESI  Presence  Management  parameters 375   ESI  Presence  Management  Reader  parameters 30   Station  move1 4   Auto  attendant  programming 41   Auto attendant  branch  programming 42   Announce  extension number 43   Automatic  day/night  mode  table 5  Voice mail programming 51   Maximum message/recording length 52   Message purge control 53   Guest/info mailboxes 54   Group  mailboxes 55   Message notification  options 551   Station delivery  options 552   Delivery/paging  parameters 56   Cascade notification  mailboxes 57   Q  &  A  mailboxes 58   Move and  delete  messages 6  Recording 61   Record  system  prompts 62   Record  directory  names 63   MOH programming 631   MOH source 632   Record  MOH   633   MOH volume 7   Reports 71   System  reports 711  Programming  report 712   Diagnostic  reports 72   ESI  Presence Management  access  door  report 73   ACD department  detail  report 74   Voice  mail  statistics  report 75   System speed-dial  list 76   NDDS  report 8   IP  programming 81   Display  licenses 82   Local  programming 821   IP  programming 822   Local  phone starting  address 824   Network  Services  Processor 83   Esi-Link  programming 831   Local  location  number 832   Esi-Link  location  programming 833   Delete  Esi-Link  location 834   Esi-Link  publish  list programming 835   Compression  algorithm 84   ESI  SIP Card  programming 85   ESI ASC  programming 86  ESI Mobile Messaging selection

Tuesday, November 15, 2016

LED

LED  functions The unit's  various LEDs  are designed to  provide visual  feedback as  follows: Power LED The  Power  LED  is  located  on  the  right side  of  the  Base  Cabinet, and  is  illuminated  when  power is  being applied to  the system.  This  LED blinks  periodically to  indicate  that  the main  processor  is  operational. Port  LEDs The  Port  LEDs  are located  above their  respective  connectors  on  each  installed port  card.  Each  LED is illuminated  when  any  port on  its  associated  port card  is  in  use.  Note:  Disconnecting a  connector  when its  respective  LED  is  lit  will disconnect  any  of  its  ports  that  are in use. Upon  power-up,  approximately five minutes  are required  for  the system  to  configure.  The  Power  and  Port LEDs  will  blink three times to  indicate  that  the power-up  sequence has been  completed.  Note:  When the LED  on a DLC1  is  . .  . •    .  . . blinking, the  T1/PRI  circuit is  out  of  service. •    .  . . not  lit  at  all,  the  T1/PRI  circuit is  in  service  but  is  idle. •    .  .  .  lit  solidly,  the  T1/PRI  circuit  and/or  a  station on the  card  are  in use. ESI  Presence Management installation For information on installing ESI Presence Management, see its Installation Manu

Monday, November 14, 2016

Frame 02 G.711

Number of G.711 Audio Frame 02 G.711 Silence Detection (VAD) Mode Input Data 1 = 10 ms 2 = 20 ms 3 = 30 ms 4 = 40 ms 0 = Disable 1 = Enable Description Maximum number of G711 Audio Frames. When the voice is encoded using the PCM (Pulse Code Modulation) method, a unit is a frame of 10ms. Select whether to compress silence with G.711. When there is silence, the RTP packet is not sent. Default 2 Related Program 0 03 04 05 06 07 08 09 10 11 12 14 G.711 Type G.711 Jitter Buffer - Minimum G.711 Jitter Buffer - Minimum G.711 Jitter Buffer - Maximum G.729 Audio Frame G.729 Silence Compression (VAD) Mode G.729 Jitter Buffer - Minimum G.729 Jitter Buffer - Standard G.729 Jitter Buffer - Maximum Number of G.723 Audio Frame G.723 Jitter Buffer - Minimum 0 = A-law 1 = μ-law 0 ~ 255 ms 0 ~ 255 ms 0 ~ 255 ms 1 ~ 6 (1 = 10 ms, 2 = 20 ms, etc.) 0 = Disable 1 = Enable 0 ~ 300 ms 0 ~ 300 ms 0 ~ 300 ms 1 = 30 msec 2 = 60 msec 0 ~ 300 ms Set the type of G.711. Set the minimum value of the G.711 Jitter Buffer. Set the average value of the G.711 Jitter Buffer. Set the maximum value of the G. 711 Jitter Buffer. Maximum number of G729 Audio Frames. G.729 assumes the audio signal made by a specimen by 8 kHz and the frame of 10 ms is assumed to be a unit to 8 kbps by the encoding compressed method. Select whether to compress silence with G.729. When there is silence, the RTP packet is not sent. Set the minimum value of the Jitter Buffer of G.729 is set. Jitter is the variation in the time between packets arriving and the buffer allows this variation to be absorbed. Set the average G.729 Jitter Buffer. Set the maximum G.729 Jitter Buffer. Maximum number of the G.723 Audio Frame. Set the minimum value of the G.723 Jitter Buffer.

Friday, November 4, 2016

bounce time

Bounce Protect Time 0 = No setting 1 ~ 15 = 100 ms ~ 1.5 sec Description Specify a time for detection of a valid offHook indication that is long enough to prevent an unintentional bounce of the receiver from being detected as a new Off-Hook indication from a Single Line Telephone. Default 3 (300 ms) 02 03 HookFlash Start Time 0 = 40 ms 1 ~ 15 = 90 ms ~ 790 ms HookFlash End Time 0 = HST + 0 ms 1 ~ 15 = HST + 100 ms ~ HST + 1500 ms (HST = Hookflash Start Time) Conditions None Specify the minimum hookflash time from a Single Line Telephone or analog Voice Mail system before it is detected as the beginning of a valid hookflash. Specify the maximum hookflash duration from a Single Line Telephone to receive a second dial tone.