base station DIP switches

Setting the base station DIP switches for a two-base station application
If you install two base stations, and there is interference between the two when in normal operating most, you can set one base station to operate in the band A (upper band) and the other base station to operate in band B (lower band). For the DIP switch settings for each operating mode, refer to Appendix A, “DIP switch settings,” on page 51.
1 Locate the base station DIP switches at the back of the first base station.
2 Set the DIP switches to normal operating mode for a two-base station application—base station A.
3 Locate the base station DIP switches at the back of the second base station.
4 Set the DIP switches to normal operating mode for a two-base station application—base station B.
The base stations each now operate in one half of the ISM band.